EID3000 work with EIA20X Configuration

Quick link

Technical Support

Project Management

Training

Warranty

Configuration Examples

FXS ports Configuration

FXO ports Configuration

FXS/FXO ports Configuration

EIA20X work with Asterisk Configuration

EIA20X work with Cisco Configuration

EID3000 work with EIA20X Configuration

EID3000 R2/H.323 Configuration

EID3000 PRI/SIP Configuration

EID3000 SS7/H.323 Configuration

Home > Products> EID3000>Configuration example

Following is a diagram of one EIA20X and one EID3000. Calling numbers are 1000 and 1001 on the EIA20X Voice gateway.

Configuration example:

Configure EIA20X

interface fastethernet 0/0
ip address 10.124.24.103 255.255.255.0
!
interface ethernet 0/0
!
voice-port 1/0
!
voice-port 1/1
!
voice-port 1/2
!
voice-port 1/3
!
dial-peer voice 100 voip
destination-pattern 2T
codec g723r63
session target ipv4:10.124.24.125
no vad
!
dial-peer voice 1 pots
destination-pattern 1000
port 1/0
!
dial-peer voice 2 pots
destination-pattern 1001
port 1/1
!
dial-peer terminator #
!
end

Configure EID3000

controller E1 3/0

pri-group 15 timeslots 1-31

interface fastethernet 0/0

ip address 10.124.24.125 255.0.0.0

interface fastethernet 0/1

interface serial 3/0:15

isdn protocol-emulate usr

interface async 0/0

interface async 0/1

line vty 0 31

voice-port 3/0:15

dial-peer voice 100 voip

destination-pattern 1T

codec g711alaw

session target ipv4:10.124.24.103

no vad

dial-peer voice 1 pots

destination-pattern 2..

port 3/0:15

dial-peer terminator #

voice-bind h323

End