EIA20X work with Cisco configuration example

Quick link

Technical Support

Project Management

Training

Warranty

Configuration Examples

FXS ports Configuration

FXO ports Configuration

FXS/FXO ports Configuration

EIA20X work with Asterisk Configuration

EIA20X work with Cisco Configuration

EID3000 work with EIA20X Configuration

EID3000 R2/H.323 Configuration

EID3000 PRI/SIP Configuration

EID3000 SS7/H.323 Configuration

Home > Products> EIA20X>Configuration example

EIA20X work with Cisco configuration example

1, Configuration Example (Do not start GK)

2, Configuration Example (start GK)

Following is a diagram of Cisco voip Router and two Aliwei EIA20X series VoIP Router. And realize interconnecting. Cisco 2611 is as the GK Router in this LAN. All other devices are as gateway. All gateway register to Cisco 2611 and lookup route and session target ras for interconnecting. We also can configure as session target Ipv4:ipaddress at dial-peer to get direct route address.

Basic Configuration

Configuration Example 1 (Do not start GK)

CISCO2611：
IOS (tm) C2600 Software (C2600-JSX-M), Version 12.1(5)T10, RELEASE SOFTWARE (fc2)

hostname 2611
!
enable password voip
!
interface Ethernet0/0
ip address 13.90.26.11 255.0.0.0
!
dial-peer voice 1 pots
destination-pattern 11...
port 1/0/0
!
dial-peer voice 2 pots
destination-pattern 21
port 1/1/0
!
dial-peer voice 4 voip
destination-pattern 31.
session target ipv4: 13.13.13 .1
codec g711ulaw
no vad
!
dial-peer voice 5 voip
destination-pattern 32.
session target ipv4:13.13.13.2
codec g711ulaw
no vad
!
dial-peer voice 6 pots
destination-pattern 12…
port 1/0/1
!
dial-peer voice 7 pots
destination-pattern 22
port 1/1/1
!

EIA20X 1：
hostname EIA20X1
!
enable password voip
!
interface fastethernet 0/0
ip address 13.13.13.1 255.0.0.0
!
interface async 0/0
!
interface async 0/1
!
line vty 0 31
!
voice-port 1/0
!
voice-port 1/1
!
voice-port 1/2
!
voice-port 1/3
!
dial-peer voice 1 pots
destination-pattern 311
port 1/0
!
dial-peer voice 2 pots
destination-pattern 312
port 1/1
!
dial-peer voice 3 pots
destination-pattern 313
port 1/2
!
dial-peer voice 4 pots
destination-pattern 314
port 1/3
!
dial-peer voice 5 voip
destination-pattern 2.
codec g729r8 bytes 20
session target ipv4:13.90.26.11
no vad
!
dial-peer voice 6 voip
destination-pattern 32.
codec g729r8 bytes 20
session target ipv4:13.13.13.2
no vad
!
dial-peer voice 7 voip
destination-pattern 11...
codec g729r8 bytes 20
session target ipv4:13.90.26.11
no vad
!
dial-peer voice 8 voip
destination-pattern 12...
codec g729r8 bytes 20
session target ipv4:13.90.26.11
no vad
!

EIA20X 2：
hostname EIA20X2
!
enable password voip
!
interface fastethernet 0/0
ip address 13.13.13.2 255.0.0.0
!
interface async 0/0
!
interface async 0/1
!
line vty 0 31
!
voice-port 1/0
!
voice-port 1/1
!
voice-port 1/2
!
voice-port 1/3
!
dial-peer voice 1 pots
destination-pattern 321
port 1/0
!
dial-peer voice 2 pots
destination-pattern 322
port 1/1
!
dial-peer voice 3 pots
destination-pattern 323
port 1/2
!
dial-peer voice 4 pots
destination-pattern 324
port 1/3
!
!dial-peer voice 5 voip
destination-pattern 2.
codec g729r8 bytes 20
session target ipv4:13.90.26.11
no vad
!
dial-peer voice 6 voip
destination-pattern 31.
codec g729r8 bytes 20
session target ipv4:13.13.13.1
no vad
!
dial-peer voice 7 voip
destination-pattern 11...
codec g729r8 bytes 20
session target ipv4:13.90.26.11
no vad
!
dial-peer voice 8 voip
destination-pattern 12...
codec g729r8 bytes 20
session target ipv4:13.90.26.11
no vad
!

Configuration Example 2 (start GK)

EIA20X 1:
interface fastethernet 0/0
ip address 13.13.13 .1 255.0.0.0
h323-gateway voip interface
h323-gateway voip id www.cisco.com ipaddress 13.90.26.11 1719
h323-gateway voip h323-id EIA20X1
h323-gateway voip tech-prefix 31
h323-gateway voip bind srcaddress 13.13.13.1
!
dial-peer voice 5 voip
destination-pattern 2./2T
codec g729r8 bytes 20
session target ras
no vad
!
dial-peer voice 6 voip
destination-pattern 32./32T
codec g729r8 bytes 20
session target ras
no vad
!
dial-peer voice 7 voip
destination-pattern 11.../11T
codec g729r8 bytes 20
session target ras
no vad
!
gateway
!

The configuiration of EIA20X and CISCO2611 are the same with the above configuration.

CISCO2611 need to configure additional commands as follows.
gatekeeper
zone local www.cisco.com cisco 13.90.26.11
no shutdown
!